Parkworld brand, #692033 Marine Shore Power Splitter Dual 30 Amp 125-Volt Twist Lock L5-30P Male Plug to 50 Amp 125/250-Volt SS2-50R female connector Y Adapter cord. This Y-Adapter allows a 50 Amp 125/250-Volt SS2-50 cord to connect where only 30 amp 125-Volt L5-30 power source are available. Please make sure that each 30 amp connection needs to be opposite phases. It has two 30 Amp 125-Volt L5-30 Locking male plugs and a marine shore power 50 AMP 125/250-Volt SS2-50R twist locking female receptacle, the plug and receptacles are fully molded and equipped with sealing collar for use in wet locations. It uses UL, cUL Listed heavy-duty 10 gage wire on the 30 Amp side and heavy-duty 6 gage wire on the 50 Amp side of this adapter.
- Marine shore power splitter two 30 Amp locking male plugs to one 50 Amp locking female Y adapter
- Dual NEMA L5-30P to SS2-50R Y adapter cord
- Plug: NEMA L5-30P, 30 Amp, 125-Volt RV/marine 3-prong twist locking male plugs with collars
- Receptacle: NEMA SS2-50R, 50 Amp, 125-Volt/250-Volt RV/marine/generator twist locking female connector
- Fully molded,
- Cable: UL, C-UL Listed STW 10 AWG/3°C wire on 30 Amp side
- Cable: UL, C-UL Listed 6 AWG/3°C plus 8 AWG/1°C wire on 50 Amp side
- Maximum operating power of 50 Amp, 250-Volt, 12,500-Watt
- Caution: please make sure to insert both plugs of this Y adapter into two 30 Amp 125-Volt receptacles on the dock side or it will not work also please use the sealling collar provided with the Y-adapter to connect the 50 Amp shore wire from your boat to the Y-adapter, this sealling collar provides a weather resistant seal between the plug and the connector
- Note: this Y-adapter will not work with 50 Amp 125-Volt power poles(such as SS1-50), it only for 125/250-Volt use
















Reviews
There are no reviews yet.